Télécharger Imprimer la page

Door Layout; Cabinet Layout - FAS International 480 ELE Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

8
1) Display: the total of the inserted coins appears on the display.
2) Coin insert slot: the coin insert slot below the display is used by the customer to insert the
amount required to buy products.
3) Coin return push-button: it is used to release coins stuck in the coin mechanism and to return
them.
4) Selection push-button panel: it is placed under the coin return push-button and it consist of a
switch set identified by numbers. To select settle the number which corresponds to the wanted
product.
5) Coin return cup: It is placed in the lower part of the machine and is used to return inserted
coins.
6) Delivery door: the delivery door is opened by the customer to collect purchases.
1) Refrigeration unit: The refrigeration unit mounted in the cabinet base maintains the products
at the correct temperature. The defrost cycle is carried out automatically every 6 hours.
2) Motor gearbox unit: It is also mounted in the cabinet base and it causes the drum column to
rotate.
3) Solenoids: The solenoids mounted on the inside of the cabinet withdraw the selected plate
and allow the drum to rotate.
4) Control box: The electrical control box in the cabinet base supplies power to all electrical
circuits in the machine and contains the main switch, the fuses and the power card.
5) Evaporator unit: it is mounted on the cabinet base and consists of two tangential ventilators,
the evaporator and a tray mounted under the evaporator to collect moisture.
6) Lighting: There are two fluorescent lamps, one mounted on the door and the other inside the
cabinet.
FAS INTERNATIONAL srl
4 - DOOR LAYOUT (fig.1)
fig. A
5 - CABINET LAYOUT (fig.2)

Publicité

loading