Télécharger Imprimer la page

FAS International 480 ELE Mode D'emploi page 28

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WHERE TO FIND THE IDENTIFICATION PLATE
The identification plate is placed both on the rear and the inside of the cabinet; for further safety,
record these numbers and keep them in your files.
WHOM TO CONTACT IN CASE OF DEFAULT
In case of need or for possible clarifications, the customer can apply to the technical and
commercial support of the area agent or of the importers, who are always in direct touch with the
builder FAS INTERNATIONAL srl.
n most of the cases, many technical inconveniences can be solved with small interventions and
therefore we advise to carefully read this booklet before calling the Assistance Service.
In case of anomalies or bad functioning which are not solvable, the user can apply to the network
of agents hereafter enclosed or directly to the builder.
Via A. Volta, 35 (Z.I.) - 36010 ZANÈ (VI) ITALY
USE OF THE DISTRIBUTOR FOR PACKED PRODUCTS
The vending machines of FAS INTERNATIONAL srl have to be used only for the sale and
distribution of packed products.

Particular attention should be given to the temperature of the products during the loading
into the distributor as it is not to be considered a machine to cool the products but to maintain the
temperature of the products.
Some example are:
- Products of confectionery, biscuits, wafer, etc.;
- Chips, pop corn, cracker, etc.;
- Sweets, chocolates, chewing gum, etc.;
- Sandwiches, pizzas, snacks (these products should be carefully packed).
Follow scrupulously the indications of the producer regarding the temperature of
maintenence and expiry date of each product.
Every other use should be considered improper and therefore potentially dangerous.
USE OF THE DISTRIBUTOR FOR BOTTLES / CANS
The vending machines of FAS INTERNATIONAL srl have to be used only for the sale and
the distribution of alimentary drinks in cans or bottles.

Particular attention should be given to the temperature of the products during the loading
into the distributor as it is not not to be considered a machine to cool the products but to maintain
the temperature of the products.
Follow scrupulously the indications of the producer regarding the temperature of maintenence and
expiry date of each product.
Every other use should be considered improper and therefore potentially dangerous.
FAS INTERNATIONAL srl
 (0445) 314029 - Fax (0445) 314302
FAS INTERNATIONAL srl
3

Publicité

loading