Publicité
Les langues disponibles
Les langues disponibles
DS 76190 BL/N
2 Notice of cleaning cooker hood.
A. To protect the main body from corrosion over a long period of time, the cooker hood should be cleaned
with hot water plus non corrosive detergent every two months.
B. Please do not use abrasive detergent for it will damage the body.
C. Keep the motor and other spare parts free from water, as this will cause damage to the appliance.
D. Before cleaning the appliance please remember to cut off power
E. The carbon filter shouldn't be exposed to heat.
F. Please don't tear open the fixed bar around the carbon filter
G. If the plug or cord is damaged, please call an authorised after sales service to replace it.
BULB REPLACEMENT
Note: if the bulb is faulty, replace immediately.
1. Disconnect from the mains.
2. Remove aluminium filter.
3. Replace burnt out bulb(s).
4. Replace Aluminium Filter.
LED 2.5W MAX
SETTING UP AND CHANGING THE ACTIVE CARBON FILTER
This system is used in locations without ducting to the outside or when it is not possible to install such
ducting.
Disconnect the machine from the mains.
A. Remove metal filters.
B. The circular filters (Figure 2) are located at either end of the motor. Turn the carbon filters anti-clockwise
until they are unscrewed.
C. Apply reverse procedure to install the carbon filter.
15
Publicité
