Product Description; Front Panel; Using The Probe; Getting Started - Elditest CT4079 Mode D'emploi

2 Product Description

1.

Front Panel

4mm Input
Safety Banana Jacks
Figure 1. Front Panel Diagram

3 Using the Probe

1.

Getting Started

1. Connect the leads to the inputs on the probe.
2. Connect the clips to the leads.
3. Connect the probe to the oscilloscope with the BNC
cable.
4. Connect the probe to the mains adapter.
5. Switch the probe from "OFF" to the desired attenuation
ratio. The power light should come on.
800-572-1028
d Quality Products Online at:
Power On/Off
Indicator (Green)
GlobalTestSupply
www.
Output BNC Connection
caltestelectronics.com
Overload Indicator
Attenuation
Function Switch
External
Power
Connection
.com
sales@GlobalTestSupply.c
(Red)
6