Introduction; Overview; Features; Initial Inspection - Elditest CT4079 Mode D'emploi

1 Introduction

1.

Overview

Use the CT4079 50-MHz differential probe to make safe and
accurate floating measurements with an oscilloscope. The
CT4079 differential probe allows conventional earth-grounded
oscilloscopes to be used for floating signal measurements of up
to ±15 kV for both differential and common mode voltage.
2.

Features

50 MHz bandwidth
z
Selectable attenuation settings of 200x or 2000x
z
Up to ±15 kV differential and common mode voltage
z
Compatible with most oscilloscopes
z
Powered by included 9 VDC mains adapter
z
3.

Initial Inspection

This unit is tested prior to shipment. It is therefore ready for
immediate use upon receipt. An initial physical inspection
should be made to ensure that no damage has been sustained
during shipment. After the inspection, verify the contents of the
shipment. The included accessories for this product are:
Two fully insulated pincer style clips (black & red)
z
Two fully insulated alligator clips (black & red)
z
Two 60 cm input leads (black & red)
z
One 100 cm insulated BNC output cable
z
One 9 V mains adapter
z
User manual
z
800-572-1028
d Quality Products Online at:
caltestelectronics.com
GlobalTestSupply
www. .com
sales@GlobalTestSupply.c
5