Introduction; Overview; Features; Initial Inspection - Elditest CT4068 Mode D'emploi

1 Introduction

1.

Overview

Use the CT4068 35-MHz differential probe to make safe and
accurate floating measurements with an oscilloscope. The
CT4068 differential probe allows conventional earth-grounded
oscilloscopes to be used for floating signal measurements of up
to ±800 V for both differential and common mode voltage.
2.

Features

z
z
z
z
z
3.

Initial Inspection

This unit is tested prior to shipment. It is therefore ready for
immediate use upon receipt. An initial physical inspection
should be made to ensure that no damage has been sustained
during shipment. After the inspection, verify the contents of the
shipment. The included accessories for this product are:
z
z
z
z
z
z
800-572-1028
800.561.8187
35 MHz bandwidth
Selectable attenuation settings of 10x or 100x
Up to ±800 V differential and common mode voltage
Compatible with most oscilloscopes
Powered by included 9 VDC mains adapter
Two fully insulated pincer style clips (black & red)
Two fully insulated alligator clips (black & red)
Two 60 cm input leads (black & red)
One 100 cm insulated BNC output cable
One 9 V mains adapter
User manual
www.
caltestelectronics.com
.com
information@itm.co
5