Elditest CT4068 Mode D'emploi page 2

Safety Summary
To avoid personal injury and/or product damage, review and
comply with the following safety precautions. These precautions
apply to both operating and maintenance personnel and must be
followed during all phases of operation, service, and repair of this
instrument.
Only qualified personnel should use this probe. This differential
voltage probe is designed to be used by personnel who are
trained, experienced, or otherwise qualified to recognize
hazardous situations and who are trained in the safety
precautions necessary to avoid possible injury when using such a
device.
This instrument is intended for usage within Measurement
Category I (CAT I) only.
Do not work alone when working with high voltages.
For your own safety, inspect the probe and accessories for
cracks and frayed or broken leads before each use. If defects are
noted, DO NOT USE the probe.
Hands, shoes, floor and work bench must be dry.
Avoid making measurements under humidity, dampness or other
environmental conditions that might affect safety.
The probe should be kept clean and free of any conductive
contamination.
Do not remove the probe casing. Removal of the probe's casing
may expose you to electric shock.
Do not use the probe with its case open.
Disconnect the inputs and outputs of the probe before opening
the case.
800.561.8187 information@itm.co
www. .com