Publicité
Les langues disponibles
Les langues disponibles
Original instruction manual
TROUBLESHOOTING
Disruption
The unit won't turn on
The operation light is on
but the appliance doesn't
work.
REPAIR
In case of a defect, the appliance must be always inspected and repaired by the
manufacturer or an authorized service agent.
IMPORTANT INFORMATION REGARDING THE DISPOSAL
This electric product is not intended to be disposed as regular household waste.
Please check with your local council or related authorities for suitable and
environmental friendly recycling facilities in your area.
32
Possible Cause
No electricity
The tip-over protection is
activated
The voltage is too low
The overheating safety
device is activated
The set temperature
(Thermostat) is below the
actual room temperature.
Solution
Check if the power cord is
plugged in or if your power
socket is functioning.
Bring your appliance in an
upright position and ensure
that it stands on a flat
surface.
Make sure that the voltage
corresponds to the rating
label on your product.
Turn off ("O") and unplug
the unit from the power
supply. Let it cool down (at
least 5 min) and ensure
that the appliance isn't
covered or objects
blocking its openings. Plug
in your unit and turn it on
again.
If necessary, increase the
temperature by turning the
thermostat switch
clockwise.
Publicité
