Publicité
Les langues disponibles
Les langues disponibles
Original instruction manual
3. Connect the power cord with a power socket. Make sure your power supply
corresponds to the power, which is indicated on the rating label beforehand.
4. The Function Switch:
With the Function switch you can select one of your desired function:
O
= OFF
= Cool Air (all heating elements are turned off)
I
= Warm Air (1000 W)
II
= Warm Air (2000 W)
Remark: Function "I" is recommended for a small room. If this isn't sufficient for
you then switch to "II".
5. The Thermostat Switch
The from you desired room temperature will be set with the Thermostat Switch.
Turn the switch clockwise to increase the temperature or anti-clockwise to
decrease the temperature.
Remark:
To set your desired room temperature and keeping it constant, please proceed as
following:
Set the thermostat switch to the highest temperature (clockwise) whereby the
operating light switches on. After your room reached the desired temperature, you
slowly turn the thermostat knob anti-clockwise till to the point the heater switches
off. The automatic temperature regulator will keep now the set room temperature
by switching the heater on and off.
CLEANING
1. Always disconnect the appliance from the mains supply and let the unit cool down
before cleaning.
2. Clean the outside of the heater with a damp cloth and wipe it dry with a separate
cloth afterwards.
3. Do not use strong detergents or solvents, which may harm the appliance's surface.
STORING YOUR FAN HEATER
1. Keep the sales packaging for off-season storage.
2. Clean the heater by following the cleaning instructions above.
3. Place the heater in the carton and store it at cool and dry place.
31
Publicité
