6.2 How to change a setting
with 2 values (ON and OFF)
When a setting is changed it will remain
valid even if the programme is
completed or a running programme is
cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to change the value
from ON to OFF or vice versa.
6. Press repeatedly the Back key until
the display shows the programme
list.
6.3 How to change a setting
with multiple values
When a setting is changed it will remain
valid even if the programme is
completed or a running programme is
cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to enter the next
level.
6. Select the new value.
7. Press the OK key to confirm.
8. Press repeatedly the Back key until
the display shows the programme
list.
6.4 How to save the
MyFavourite programme
You can only save 1 programme at a
time. A new setting cancels the previous
one.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select Set MyFavourite.
5. Press the OK key.
The display shows the programme list.
6. Select a programme.
7. Press the OK key.
8. The display shows Add option and
Done.
• Select Done if you want to save a
programme without options and
press the OK key.
• Select Add option to add an
option to the programme and
press the OK key to confirm.
Once an option has been
selected the display shows Add
option and Done. If you want to
select another option select again
Add option otherwise select
Done.
9. Press the OK key.
If the programme has the TimeSaver
option, you have to select Fast or
Normal.
10. Press the OK key to confirm.
The display confirms that the
MyFavourite programme has been
saved.
6.5 AutoOpen
AutoOpen is automatically activated
when you select ECO programme and it
is not possible to select this setting with
other programmes.
The default setting for AutoOpen is ON.
• While the drying phase operates, a
device opens the appliance door and
keeps it ajar.
• At the end of the programme, the
device retracts but the appliance door
can remain ajar or retract without
closing.
If you want to activateAutoOpen
please refer to "How to change a
setting with 2 values (ON and OFF" at
the beginning of this chapter.
ENGLISH
11