Samsung HW-J6000 Manuel D'utilisation page 18

CONNECTIONS
+ Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, set the Auto Power function ON to have
the Soundbar turn on automatically when you turn the TV on.
AUTO POWER LINK
ON
OFF
1. Connect the Soundbar and a TV with an Optical cable (not supplied).
2. Press the (Source) button on the main unit's top panel or the SOURCE button on the remote control to
select the D.IN mode.
3. Press the AUTO POWER button on the remote control to toggle the Auto Power Link function on and off.
● Depending on the connected device, Auto Power Link may not function.
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
1. Turn on the TV and Soundbar.
•
Turn on the menu of the TV.
•
Move to Speaker Settings on "Sound" tab.
•
Set the "Add New Device" menu to "On".
2. Press the (Source) button on the main unit's top panel or the SOURCE button on the remote control to
select the TV mode.
3. On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <Yes> to finish connecting the TV and Soundbar using the TV's remote control.
HW-J6000_J6001_XU_ENG_0303.indd 18 HW-J6000_J6001_XU_ENG_0303.indd 18
Display
OFF - ANYNET+ / ON - POWER LINK
ON - ANYNET+ / OFF - POWER LINK
Connect
18
2015-03-03 2015-03-03 6:18:16 6:18:16