Publicité
Les langues disponibles
Les langues disponibles
SM11 USER MANUAL
P r o f e s s i o n a l D i g i t a l M o n i t o r i n g S y s t e m
An example of this equipment has been tested and found to comply with the following European
directives and international standards:
Electromagnetic compatibility
EN 55103
EN 61000
Electrical safety
EN 60065
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE.
Important safety information
Please read carefully the following instructions and safety information. Heed all warnings and follow all instructions.
• Do not remove the back panel. There are no user serviceable parts inside; please refer to qualified service personnel.
This equipment must be earthed.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Servicing is required when the unit has been damaged in any way, such as power cord or plug is damaged, liquid has been
spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has
been dropped.
• Do not place naked flame sources, such as lighted candles, on the apparatus.
• Use the apparatus only in moderate climates (not in tropical climates).
• Do not expose the apparatus to dripping or splashing.
• Do not place objects filled with liquids, such as vases, on the apparatus.
Precaution
The SM11 uses a tweeter equipped with a beryllium dome, allowing a frequency range extending beyond 40kHz. In its solid
form, beryllium is harmless. However, due to its nature, certain special precautions should be observed to avoid exposure to
unnecessary risk:
• Under no circumstances should the beryllium dome be subjected to any form of abrasive action.
• In the unlikely case of damage to the dome, of any form, a wide piece of adhesive tape should be immediately used to seal the
whole front surface of the tweeter. You should then inform the dealer from whom you purchased the product so that the tweeter
can be removed by a professional and returned to the product distributor for replacement.
• If the dome is broken in any way giving rise to loose particles of beryllium, these should be carefully collected with the use of an
adhesive tape and sealed in a zip-top bag to be returned with the tweeter.
For further information, please contact Focal-JMlab directly:
beryllium@focal-fr.com
2
Publicité
