Purpose Of The Equipment - Zhermack FURNACE DE 1 Manuel D'utilisation Et D'entretien

2
Figure
3
Figure
After pressing the main switch wait about 10 seconds before beginning data
programming.
Even when the DE oven is at ambient temperature it is still advisable to use
protective gloves during handling.
Should, after pressing the main switch the word OFF fails to appear on the display
(1) and, instead, there appear four numbers, press CYCLE (5).
Failure to observe any of the above equipment installation instructions may lead to
malfunctions and render the warranty null and void.

PURPOSE OF THE EQUIPMENT

6.6
The ovens of the DE series have been designed to effect the firing and/or fusion of lining
cylinders used in odontotechny.
132 of 260
EN
Fig. 2: Open the oven door using the handle (B).
After inserting the cylinders to be fired close the door
securely.
Fig. 3: Press the main switch positioned on the
control panel: the switch will light up.
• the word OFF appears on the display (1).
The oven is now ready for data programming.
MAINTENANCE AND USE MANUAL
FURNACE DE 1 / DE 2 / DE 3