Hisense RB372N4AC2 Mode D'emploi Pour L'utilisateur page 40

it.In this case retain packing.
It is advisable to wait at least four hours before
●
connecting the appliance to allow the oil to flow back in the
compressor.
Adequate air circulation should be around the appliance,
●
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be
●
too close to a wall to avoid touching or catching warm parts
(compressor,
the instructions relevant to installation.
The appliance must not be locate close to radiators or
●
cookers.
Make sure that the mains plug is accessible after the
●
installation of the appliance.
Service
Any electrical work required to do the servicing of the
●
appliance should be carried out by qualified electrician or
competent person.
This product must be serviced by an authorized Service
●
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)If the appliance contains freezer compartment.
condenser ) to prevent the risk of a fire, follow
8