Publicité
Les langues disponibles
Les langues disponibles
Manual INERIS 17 ATEX 9001U
3
1.
General information
The operating instructions must always be pre-
served during the lifetime of the product. It sum-
marizes the key safety measures.
It must be read by everyone working with the
product so that they know to handle it properly.
The contact block or/and control units Ex db eb
can be delivered with certificate as "Compo-
nent".
The contact block or/and control units Ex db eb
must be used only for the purposes for which it
was intended.
thuba Ltd. shall not be held liable for damages
resulting from incorrect or improper use or non-
compliance with this manual.
Only authorized and trained persons are author-
ized to perform work on the contact block
or/and control units Ex db eb (installation, com-
missioning, maintenance, maintenance).
During installation and operation, it is imperious
to follow the instructions (technical characteris-
tics and operating conditions) written on the
marking plate of the contact block or/and con-
trol units Ex db eb.
Edition March 2017
thuba Ltd., CH-4015 Basel
Copyright
Switzerland
Publicité
