TecniDelta MAYOR Manuel De L'utilisateur page 63

EN
To begin the programming:
„ Fill the fi lter-holder with one or two doses of coffee for programming one
or two cups;
„ Put the fi lter holder in the left group (the settings of the left group are
transfered to all other groups automatically)
„ During 3 seconds press button 5.
„ When the programming mode begins, button 5 will start blinking.
„ In less than 3 seconds, press the button matching the dose we want to pro-
gram. The extraction will begin. Press the same button as soon as extraction
as reached the desired dose.
„ Repeat this process to program all the other buttons.
„ If button 5 Led stop blinking, it means that machine get out of the adjusting
mode, being necessary repeat all the procedure to adjust missing doses.
„ You can get out of the adjust mode anytime. For that you only have to press
button 5 for 3 seconds.
GROUPS CONTROL KEYBOARD:
Button 1
: 1 espresso coffee
Button 2
: 1 coffee
Button 3
: 2 espresso coffees
Button 4
: 2 coffees
Button 5
: Start/Stop
Button 6
: Hot Water Faucet
63