Cartridge Operations/Features - Lincoln Electric VIKING 3250D FGS Manuel De L'opérateur

ON/MODE Button
ON-OFF (Lens will automatically darken when arc is present)
•
The Shade Cartridge will automatically turn on, the digital display control
will activate and helmet will be ready for use. It is recommended that the
user review helmet settings prior to use. The welding helmet will
automatically turn off after half hour of no use.
MODE CONTROL
•
Short press of the
ON/MODE button
to select the mode
appropriate for the
work activity:
Weld Mode − used for most welding applications. Push "FUNC" button
to adjust shade number, sensitivity, and delay settings before welding. In
this mode, the lens turns to dark immediately when you start welding.
Cutting Mode − used for cutting applications. Push "FUNC" button to
adjust shade number, sensitivity, and delay settings before cutting. In
this mode the lens turns to dark immediately when you start cutting.
Grind Mode − used for grinding applications. In this mode the lens
shade is fixed shade No. 4. Shade number, sensitivity, and delay
settings cannot be adjusted when in grind mode.
Battery Indicator
The symbol "
shows the current state
of the battery. The
volume of batteries has
four level symbols (See
Figure 3). The symbol
" " appears on the
display screen before 1 to 2 days of battery life remains, CR2450 lithium
batteries should be replaced at this time. The symbol of the Battery Indicator
is not real-time and is updated shortly after pushing the ON/MODE button.
CARTRIDGE OPERATION/FEATURES
4/5-8/9-13 TM 1/1/1/1
CSA Z94.3 /
TM Z87W4/5-8/9-13
"
4/5-8/9-13 TM 1/1/1/1
CSA Z94.3 /
TM Z87W4/5-8/9-13
FIGURE 2
GRIND CUTTING WELD
DELAY SENS.
FIGURE 3
GRIND CUTTING WELD
DELAY SENS.
6
ON
MODE
FUNC
C
SHADE
ON
MODE
FUNC
SHADE