Mr Handsfree Blue Switch Plug & Play Manuel D'utilisation page 15

4. Blue Switch Pro Music 100: Immediately to the car's electronic system via system cable Pro Music
100 (Optional)
• Take out your car radio according to the specifi cations of your car and your radio.
• Unplug the antenna plug from your radio and connect it to the female antenna socket of your
Pro Music 100.
– If the car has DIN type (1),
make the connection via the
conversion plug (3).
– If the car has ISO type (2),
make the connection directly.
– If the car has FAKRA type,
make the connection via the
conversion plug (4.2).
• Plug the male antenna plug from the Pro Music 100 into the car radio.
– If the car has DIN type (1), make the connection directly.
– If the car has ISO type (2), make the connection via the conversion plug (3).
– If the car has FAKRA type, make the connection via the conversion plug (4.1).
• Select a frequency with the 4 dip switches on the Pro Music 100. The frequency table is printed
on the backside of your Pro Music 100. Please take a close look at this frequency table!
• Connect the ISO-plug to the radio and speakers. If your car is provided with plugs other than
ISO-plugs, you will need adapters. These are not included.
• Guide the wire with the button and the 2.5 mm / 3.5 mm jack plug to the place where your audio
device is located.
• Select your charging wire, for mini USB or iPod, and connect this to the Pro Music 100. Guide
this wire also to the place where your audio device is located.
• Place your Pro Music 100 in the hole behind your car radio and place your car radio back into
its place.
1
4.1
4.2
GB-15
2 3