Publicité
Les langues disponibles
Les langues disponibles
STANDERD ACCESSORIES
● Non-cutting Guard
● Side handle
● Spanner
● Flange
Be sure to check the accessories as it is subject
to change by areas and models.
OPERATION
1. POWER SUPPLY
The power tool supply must match the
nameplate date.
2. INSTALLING SIDE HANDLE
Thread side handle into side handle socket on
desired position and tighten securely. Please use
the side handle fully.
3. ADJUSTING AND DISASSEMBLING GUARD
When you fit the guard, ensure that the prominence
on the hoop of the guard coincides with the groove
in the gear-case cover. Then turn the guard to the
working position counter-clockwise. At last, tighten
the bolt.
(Click to the instructions in the direction for the
installation, contrary to the disassembly.)
Before operation , be sure that the guard is fixed
securely. Loosen the fixing screw , the guard can
be adjusted to desired position , tighten the fixing
screw firmly to fix the guard in the position.
4. MOUNTING WHEEL
WARNING: Only use grinding wheels with
6
maximum safe operating speed rated at or
above 80m/s. Never use damaged or imbalance
grinding wheels.
1) In the spindle (3) completely static situation,
Lock it by pressing the spindle lock button (1),
2) Slip the inner flange (5) onto spindle, wheel
(6) loaded withstood the inner flange. Then
have the thread on flange (7) screw together
to the spindle(Pays attention to the outer
flange the installment direction following chart
to show : When installment grinding wheel
and cutting disc uses the different surface
contact piece ).
Publicité
