Clean The Filter Canister - Aqua Products EP37 Serie Mode D'emploi

Figure 7. Lift Cleaner From Pool with Handle
3. Hold the cleaner vertically over the
pool surface to drain water before
removing (Figure 8).
Figure 8. Drain Water from the Cleaner

Clean the Filter Canister

Empty the canister as soon as the cycle ends.
WARNING
To avoid electric shock and other hazards
which could result in permanent injury or
death, disconnect (unplug) the cleaner from
the power source before performing any
cleaning and maintenance.
1. Unplug power to the cleaner at the
control unit. Unplug the control unit
from the power source.
2. Pull up to release the filter canister
handle (Figure 9).
Figure 9. Release Filter Canister Handle
3. Grasp the handle and lift up to remove
the filter canister (Figure 10).
Figure 10. Remove the Filter Canister
9