Using Business Mode; Using Stealth Mode; Controlling Calls; Using Voice Messages - Beyerdynamic SPACE Mode D'emploi

Using Business Mode

In Business Mode, a maximum of one device can be
paired with the beyerdynamic SPACE Personal Speaker-
phone. The pairing list is automatically deleted when the
speakerphone is disconnected or switched off.
To call up Business Mode:
► Press the
button and
for 1 to 3 sec.
To deactivate Business Mode:
► Press the
button and
for 1 to 3 sec.

Using Stealth Mode

In Stealth Mode, the illumination of the LED ring on the
beyerdynamic Personal Speakerphone can be switched
off without switching off the speakerphone.
Operating in Stealth Mode increases battery life during
operation.
To activate Stealth Mode:
► Press the
button and
for 1 to 3 sec.
The lighting on the LED ring goes out.
To deactivate Stealth Mode:
► Press the
button and
for 1 to 3 sec.
The lighting on the LED ring comes on.
Stealth Mode is also deactivated when the speaker-
phone is switched off and on again.

Controlling calls

To accept a call:
► Briefly press the
button.
To end a call:
► Briefly press the
button.
To reject a call:
► Briefly press the
button.
To switch a call or accept a second call:
► Briefly press the
button.
beyerdynamic SPACE Personal Speakerphone
button simultaneously
button simultaneously
button simultaneously
button simultaneously
LED display for calls:
Incoming call
Call in progress
Call on hold

Using voice messages

To activate voice messages:
► Press the
button and
for 1 to 3 sec.
To deactivate voice messages:
► Press the
button and
for 1 to 3 sec.

Resetting to factory settings

All personal data is deleted if the device is reset to the
factory settings!
To reset to factory settings:
► Press the
button and
for 3 to 4 sec.

Settings for best sound

To achieve the best possible sound with your beyerdy-
namic SPACE Personal Speakerphone via Bluetooth®,
please observe the following practical tips:
1. Set the volume to minimum on your beyerdynamic
SPACE Personal Speakerphone and to maximum on the
playback device.
2. Then adjust the volume only on your beyerdynamic
SPACE Personal Speakerphone and not on the play-
back device.
This applies only to playback devices that do not auto-
matically synchronise the volume. On playback devices
that automatically synchronise the volume (e.g. iPhone,
iPad, various Android smartphones), the volume on the
speakerphone is always identical to the volume of the
playback device.
3. Deactivate any audio effects that may be present in
the software of the playback device.
Operation
flashes green
flashes red
steady green
steady red
flashes green
steady red
button simultaneously
button simultaneously
button simultaneously
11/14