Multi-Point Operation; Adjusting The Volume; Using The Mute Function; Playing Media - Beyerdynamic SPACE Mode D'emploi

Operation
To delete a cascade
9 Check that both SPACE devices are connected.
► Briefly press the
simultaneously on both SPACE devices.
The Bluetooth® connection between the two devices
(cascading) is deleted.

Multi-point operation

The beyerdynamic SPACE Personal Speakerphone can be
paired with several Bluetooth®-enabled devices.
In normal mode, up to eight devices can be paired.
In business mode, only one device can be paired.
Active connections are possible with up to two devices at
a time. However, playback of music and phone operation
is only possible with one device at a time. Phone opera-
tion has priority over playback of music, i.e. playback of
music is interrupted during phone calls.
Priority list when using the playback devices (PD):
PRI . Profile
1 HFP (phone operation) PD 1 (device used first)
2 HFP (phone operation) PD 2 (device used second)
3 A2DP
(playback of music)
4 A2DP
(playback of music)
Setting up multi point:
1 . Connect the Personal Speakerphone to the first
device (see „Pairing with a device via Bluetooth®" on
page 9).
2 . Deactivate the Bluetooth® connection on the first
device.
3 . Connect the Personal Speakerphone to the second
device (see „Pairing with a device via Bluetooth®" on
page 9).
4 . Reactivate the Bluetooth® connection of the first
device that automatically connects to the product.
Once both devices are paired with the Personal Speak-
erphone, the speakerphone connects to both devices
each time it is switched on.
Using multi point:
9 If you have connected the speakerphone with two
devices and have just activated media playback:
► Briefly press the
incoming call.
9 If you have connected the speakerphone to two
devices and have just ended a call:
► Briefly press the
playback that was last played.
10/14
button and the button
Playback devices (PD)
PD 1 (device used first)
PD 2 (device used second)
button once to accept an
button once to start the media

Adjusting the volume

To increase/decrease the volume:
► In stages: Briefly press the
► Continuously: Hold down the
A signal tone sounds when the maximum/minimum
volume is reached.
LED display for volume control:
White: zero*–full volume**
*) At a volume close to zero LEDs except one (lit 50%) are
off .
**) At full volume, all LEDs are on (ring illuminated white) .

Using the mute function

To switch mute on/off:
► Briefly press the
Icon is a steady red when mute.
► Briefly press the
Mute is cancelled.

Playing media

The functions described depend on the playback device
and playback device software and may not be avail-
able.
To start / pause playback:
► Briefly press the
To play the next / previous track:
► Briefly press the

Calling up the personal assistant

To call up the personal assistant of your smartphone or
tablet:
► Press the
button for 1 to 3 sec.

Using Sound-Activated Lighting Mode

When Sound-Activated Lighting Mode is activated, the
LED ring lights up in time with the audio signals.
To switch on the function:
► Press the
button and
for 1 to 3 sec.
To switch off the function:
► Press the
button and
for 1 to 3 sec.
beyerdynamic SPACE Personal Speakerphone
/ button.
/ button.
–
button.
button again.
button once.
button twice / three times.
button simultaneously
button simultaneously