Publicité
Les langues disponibles
Les langues disponibles
Functional Description
1 1/2" Square Head
2 Left/Right Switch Button
3 On/Off Switch
4 Soft Grip
5 Battery Pack
6 Battery Pack Release Button
7 Led Work Light
Selecting Correct Socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and inconsistent
fastening torque and / or damage to the bolt or nut. Refer to
accessories section for socket size.
Installing or Removing Socket
Always be sure that the tool is switched off and the battery
pack is removed before installing or removing the socket.
To install the socket, push it onto the anvil (1) of the tool until
it locks into place. To remove the socket, simply pull it off.
Using the Machine
Forward / Reverse
Select the direction of rotation by pressing the forward / reverse switch
(2).
The forward / reverse switch has a lock function and cannot be used
when the trigger is depressed.
Ensure the impact wrench has come to a complete stop before
changing direction
Switching ON / OFF
To switch ON: Pull the trigger (3)
To switch OFF: Release the trigger
LED Worklight
The impact wrench is equipped with an LED worklight (7).
The LED worklight illuminates immediately after pulling the trigger
and turns off once you release the trigger.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Socket
Anvil
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
