Publicité
Les langues disponibles
Les langues disponibles
Technical Data
Rated voltage: 18V DC
Rated speed: 0 - 1600 RPM
Rated impact: 0 - 3200 BPM
Output profile: external square
Drive profile size, metric: 12.5 mm
Drive profile size, imperial: 1/2"
Max. working torque: 520 Nm
Sound pressure level (LpA): 99.6 dB(A)
Sound power level (LwA): 110.6 dB(A)
Vibration level (ah): 17.95 m/s²
Vibration level (K): 1.5 m/s²
Battery pack: 18V DC 4.0 Ah Li-Ion
Battery charger input: 100-240V AC, 50Hz, 75W
Battery charger output: 18V DC 2500mA
Charging time: approx. 100 min.
Class: II
Warning
For your own safety, read this manual and the general safety instructions carefully before using the
appliance. Your power tool should only be given to other users together with these instructions.
General Power Tool Safety Warnings
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
Electrical Safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk
of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Cordless Impact Wrench
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9919
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
