Publicité
Les langues disponibles
Les langues disponibles
Overload Protection and other Safety Features
The machine/battery pack has a number of safety features that prevent damage to the machine and
battery pack during use.
• During short high-load situations the overload protection may turn off the machine/ battery pack.
This protection resets automatically. Release the trigger, wait a few seconds, ensure that there is
no load and restart the machine. The machine should now function normally again.
• During high-load for extended periods the overheating protection may turn off the machine/battery
pack. The protection resets itself but the machine cannot be restarted until it has returned to
normal operating temperature. Let the machine cool properly before trying to restart it. Adverse
temperatures can occur in direct sunlight and should therefore be avoided.
• The battery pack has low-voltage protection which comes into effect when the batteries becomes
discharged. The low-voltage protection turns off the machine automatically and the battery pack
should be recharged.
Maintenance and Cleaning
Maintenance
The contacts on the battery pack and the charger must be kept clean. All replacement parts must be
replaced by a trained electrician or an authorized service centre unless stated otherwise in this
manual
Cleaning
Clean the battery charger housing using a soft, dry cloth. Disconnect the charger from the mains
before cleaning.
Remove the battery before cleaning the battery charger.
Ensure that the ventilation slots are not blocked.
The contacts on the battery pack and the charger must be kept clean.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment.
Disposal
Do not dispose battery in household waste. Batteries should be disposed of in a
responsible manner, they must be disposed at appropriate collection point.
Dispose of this product at the end of its working life in compliance with the EU Directive
on Waste Electrical and Electronic Equipment. Contact your local solid waste authority
for recycling information or give the product for disposal to BGS technic KG or to an
electrical appliances retailer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
