LUCCI Air AIRFUSION ARIA Manuel D'installation page 7

Aria Installation Instructions
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. (Fig.4)
Blade attachment
1. Before Installing the blades, remove the motor screws and flat washers.
2. Secure the blade on the motor by using 2 screws with washers to tighten it, ensuring they are
tightened simultaneously. (Take care not to over tighten as this can damage blades)
Once completed, repeat the process on the remaining blades.
Installing the bottom cover (For fan without light)
Secure the bottom cover to the fan by turning it clockwise.
Installing the LED light kit (For fan with light)
Attach the LED light kit to the lamp base and connect wires to the LED light kit via
the quick connectors. Secure the LED light kit on the lamp base by turning the
LED light kit body clockwise.
6 | P a g e
HANGING THE FAN
INSTALLING THE FAN
Fig. 4
Fig. 5
Fig. 6
Fig. 7