miniland baby warmy advanced Mode D'emploi page 19

9. When the warming process has been completed, it will
beep 5 times to let the user know that the process has been
completed.
The unit will shut off automatically after 15 minutes of waiting time. During this time
it is possible to switch off the unit by pressing the MODE button for 3 seconds, or to
start a new process, press the MODE button.
NOTE 1: During the warming process if there is not enough
water to complete the process, you will hear 5 beeps and the
display will flash in red, showing the water icon.
Please put 40ml of tap water into the heating chamber (add water up to the
line in the heating chamber) and press the MODE button once. The device
will automatically continue the process with the remaining time.
NOTE 2: Please note that there are many variables, such as the size of bottle,
the material the bottle is made of, the shape of the bottle, the texture of the food
and the starting temperature of the food and milk. This can affect the warming time
and final temperature of the bottle or jar. Adjustment to the warming time may be
necessary. Always test the temperature of the food or liquid before feeding your
baby by testing first on a sensitive part of your skin.
5.3. STERILISATION
1. For sterilization put the bottle inside the warming basket (7)
2. Put the lid (9) on the main body (1).
3. Now you need to set your preferences for sterilization.
First choose between warming up the baby bottle, the baby food or the sterilization
functions by pressing the UP & DOWN arrow buttons (if, for example you choose
the sterilization function), there is a beeping sound every time that you press an
arrow button. When you reach the desired function, press the MODE button once
to go to the next step (you will hear a beeping sound every time that you press the
MODE button).
4. Now if you want to program the device to start the process
some time later, you can do it by pressing the UP and DOWN
arrow, press longer to move faster into the digits (you can
select until 24 hours later). If you want to start the process
immediately, just leave it at 00:00.
When you reach the desired waiting time, press the MODE button once to go to the
next step.
NOTE: if you are in the CAR, this function is not enabled.
ENGLISH
00:00
m:s
01:13
m:s
00:00