miniland baby warmy advanced Mode D'emploi page 18

ENGLISH
Temperatures
22ºC Ambient
5ºC Fridge
-17ºC Freezer
When you reach the desired temperature, press the MODE button once to go to
the next step.
6. Now, according to your previous selections, the screen will
show the estimated time for the process, if you want to modify this,
you can do so by pressing the UP and DOWN arrow buttons
(if not just save).
When you reach the desired time (or save the default time), press the MODE
button once to go to the next step.
7. Now if you want to program the device to start the process
later, you can do so by pressing the UP and DOWN arrow,
press longer to advance the digits faster (you can select up
to 24 hours later). If you want to start the process immediately,
just leave it at 00:00.
When you reach the desired waiting time, press the MODE button once to go to the
next step.
NOTE: if you are in the CAR this function is not enabled.
8. Now the display turns RED for 1 second
and then displays the selected options.
If all the settings are correct, (and you have not programmed
a time) just wait 5 seconds without pressing any button until
the process automatically starts up, the display will show the
remaining time until the end of the warming process.
If you have programmed in a time, the device will start up
after this period of time has lapsed.
However when you see the selected options on the RED screen if you want to
change them, please press the MODE button and you will go to the configuration
menu again (please go back to step 6).
00:00
ml
150
2:20
m:s
130
gr
2:20
m:s