Wireless Interlink (Wrlym-1 Only) - FireAngel RLYM-1 Mode D'emploi

WIRELESS INTERLINK
(WRLYM-1 ONLY)
The WRLYM-1 is designed to be wirelessly interlinked
with up to 50 products within the Wi-Safe 2 product
range. It is not designed to communicate with wireless
devices from other ranges or manufacturers. These
devices need to be 'learned-in' or interlinked in order
to communicate with each other.
Wi-Safe 2 eliminates the need for interconnecting
wires around a property making future system
WIRING KEY
= Earth
= Live
= Neutral
Mains 230V AC
Power Supply
Smoke / Heat Alarm
modifications easy and cost effective. The WRLYM-1
relay will still need a mains supply at the point of
installation (see 'Installation' section).
IMPORTANT: Obstructions such as steel reinforcement
in concrete could block or impede the wireless signal.
While the wireless range is over 200 m in clear air /
clear line of sight, the effective range may be reduced
by walls and other obstructions in the building. It is
recommended not to exceed 35 m as the maximum
distance between devices in a network.
Relay unit
8
Mains 230V AC
Power Supply