Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
SET
Use the cursor to select SET and confirm with
OK. Use the cursor to select the required parame-
ter such as brightness, contrast, hue and saturation.
Set the parameter with the buttons SNAP and
RECORD and confirm with OK. Then, the unit auto-
matically returns to the main menu.

SAVING POWER

Select SAVING POWER and confirm with OK. Now
set if and when the saving power mode starts
and confirm with OK. Then, the unit automatically
returns to the main menu.
The display will shut down after the time set but
the system will still work. Press any button to open
the display again.
EXIT MODE
Any menu can be left by pressing ESC. Now, the instrument is in the video mode and can be powered
off.
NOTE
·
Do not bend the gooseneck more than 90°.
·
Take out the battery if you do not use the instrument for a long time.
·
Clean the camera before use.
·
Please only use the original battery pack.
22

Publicité

Table des Matières
loading

Table des Matières