Power Supply - geo-FENNEL FMM5 Mode D'emploi

DC Current
Range
200uA
200mA
10A
Overload protection: 0.2A / 250V fuse (10A range unfused)
Measuring voltage drop: 200mV
Resistance
Range
200Ω
2 kΩ
200 kΩ
2 MkΩ
Overload protection: 15 seconds maximum 250V DC or 250V AC rms. on all ranges
Maximum open circuit voltage: 2.8V
Transistor hFE
Range: 0~1000
Base current: 10uA dc approx. (Vce = 2.8V dc)
Diode and continuity check
Diode: Test current 1.4mA DC and open circuit voltage 2.8V DC
Continuity: Built-in-buzzer will sound if the circuit resistance is less than 100Ω
Overload protection: 15 seconds maximum 250V DC or 250V AC rms.

POWER SUPPLY

Before first use or if the battery status indication shows a low battery („BAT") a new battery must be
inserted. Power off the instrument, open the battery case and insert a new battery. Take care to correct
polarity and close the battery cover.
Resolution
0.1uA
100uA
10mA
Resolution
0.1 Ω
1 Ω
100 Ω
1 kΩ
Accuracy
+1.0 % of rdg + 2 dgts
+1.2 % of rdg + 2 dgts
+2.0 % of rdg + 5 dgts
Accuracy
+0.8 % of rdg + 4 dgts
+0.8% of rdg + 2 dgts
+0.8% of rdg + 2 dgts
+1.0 % of rdg + 2 dgts
EN
B
15