Advanced Settings - Z Button; Internal Memory Of The Looky - Rehan Looky+ Manuel D'utilisation

7.5.2 Advanced settings – Z button
With the Z button you can adjust the brightness of the screen. By
pressing the Z button you will lower the screen brightness by 20% -
by doing so you will hear a sound that decreases in pitch. The lowest
screen brightness is 20%, when you press the Z button once more the
screen brightness will go back to 100% - when doing so you will hear
a sound that increases in pitch. The Looky+ has 5 possible screen
brightness settings: 100% - 80% - 60% - 40% - 20%.

8 Internal memory of the Looky+

The Looky+ stores the following settings in its memory when switched
off and on:
• The reading mode that was used last (with exception of the full
colour mode without lighting – instead of this mode, the Looky+
will start up in the reading mode that was used last before select-
ing the full colour mode without lighting).
• Whether the sound notifications are switched ON or OFF.
• The selected brightness of the screen.
EN
11