Note: if the bottle is more than half empty, you should repeat the
process a second time to make sure all the oxygen has been
vacuumed from the bottle.
Lift the wine bottle preserver up and away from the bottle.
Always return the appliance to the charging base when finished.
Date Indicators on wine stoppers
Use the "▼" symbol to indicate the date when the bottle was
sealed with your Wine Preserver.
Gently swivel the silver ring to left or right until the correct date is in
line with the "▼" symbol.
Opening a bottle sealed with the wine preserver
Firmly hold the bottle in one hand and gently remove the wine
stopper away from the bottle with the other hand.
Store the wine stoppers in a clean safe place or on the base until
the next use.
Note: you can remove the vacuum in the bottle also by pressing the pin
at the centre of the wine stopper to the side; if the bottle was sealed
recently you should hear the air entering the bottle again.
CLEANING AND STORAGE
Clean the exterior surface of the product by wiping it with a soft,
damp cloth.
Do not use any abrasive cleaners or solvents, as product damage
will occur.
Do not attempt to clean any inside surfaces of the wine bottle
opener or preserver.
We recommend that you always return your Wine Opener and
Wine Preserver to the charging base so that they are fully charged
and available to use at any time.
Store the set on its base in a clean, dry place when it is not in use.
Store the appliance in a dry location. Do not place any heavy items on
top of appliance during storage as this may result in possible damage
of the appliance. Store the charging adaptor in a clean, dry location
www.KALORIK.com
9
CKS 40792 - 170120