Yuasa BATTERY YUA00BTY01P Manuel Du Propriétaire page 7

SYSTEM TEST:
1. Press «ENTER» button, you will view the screen.
2. Turn off all powersports vehicle accessories
such as lights, radio, etc. Before starting the
engine.
3. When the engine is started, one of the three
results will be displayed along with the actual reading measured:
CRANKING VOLTS NORMAL
The system is showing normal draw. Press «ENTER» to
perform the charging system test.
CRANKING VOLTS LOW
The cranking voltage is below normal limits, troubleshoot the starter with
manufacturers recommended procedure.
CRANKING VOLTS NOT DETECTED
The cranking voltage is not detected.
4. If the cranking voltage is normal, press
«ENTER» to being charging system test.
5. Press the «ENTER» button, you will view the
screen. The cranking voltage is not detected.
CRANKING VOLTS
XX.XXV NORMAL
CRANKING VOLTS
CRANKING VOLTS
PRESS ENTER FOR
= CHARGING TEST =
- 6 -
SYSTEM TEST
XX.XXV
TURN OFF ACC.
START ENGINE
XX.XXV LOW
NOT DETECTED
MAKE SURE ALL
ACC. ARE OFF