Publicité
Les langues disponibles
Les langues disponibles
4.
You will see the battery voltage measured as
connecting to battery. Press «ENTER» button.
5.
Press the
key to select the battery type:
• CONVENTIONAL
• AGM
Press «ENTER» to confirm choice
6.
Press the
key to input the battery capacity of AH: 2~32.
Press «ENTER» to begin the test.
7.
Press the
key to select battery charged: Yes or No. Press
«ENTER» to confirm choice.
8.
When test is completed, the display shows the actual volts, SOH
(state of health) or SOC (state of charge). One of six results will be
displayed:
GOOD & PASS
The battery is good & capable of holding a charge.
GOOD & RECHARGE
The battery is good but needs to be recharged.
RECHARGE & RETEST
Battery is discharged. The battery condition cannot be
determined until it is fully charged. Recharge & retest the battery.
BAD & REPLACE
The battery will not hold a charge. It should be
replaced immediately.
GOOD & RECHARGE
RECHARGE & RETEST
BAD & REPLACE
- 4 -
BATTERY VOLT
XX.XXV
BATTERY TYPE
CONVENTIONAL
GOOD & PASS
XX.XXV
XX.XXV
XX.XXV
XX.XXV
Publicité
