1. Infrared lamp
2. Protective cover
3. Adjustable lampshade (5 positions)
4. Base
5. Protective goggles
Power consumption: 100W
Mains connection: 220-230V ~ 50-60 Hz
Max. Radiation intensity: 680W/m2 at 60 cm
Operating conditions:
Temperature: +5°C until +35°C
Relative humidity: 15%-93%
Expected operating life of the device: 7 years
Subject to technical modifications. This device meets the requirements of the European Medical Devices Direc-tive 93/42/EEC with
amendments as well as the German Medical Devices Act.
The serial number is located on the device or in the battery compartment.
This infrared lamp is only intended for radiating the human body.
Infrared radiation causes warmth to be transported to the human body. The blood supply in the radiated skin is increased
and the metabolic turnover in the field of temperature is enhanced. The mode of action of infrared light encourages the
body to heal; healing processes are thus assisted in a specific area. Infrared light can be used as a parallel treatment in
diseases of the ear, nose and throat and to assist in facial and beauty care, especially in case of impure skin.
However, first ask your family doctor whether application in the individual case is advisable from a medical standpoint.
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic bags and cardboard) out of reach of children. Before use, check whether
the infrared lamp is properly screwed in. Also check that the protective cover is securely in place. Always ensure that the
appliance is on a secure and even surface.
The appliance has an adjustable lampshade. The 5 positions of inclination make it possible for you to adjust the infrared
lamp according to your needs. Set the angle of the fluorescent screen in accordance with your individual requirements. The
distance between the infrared lamp and the radiated part of the body should not be less than 60 cm (24 inch). Always use
the protective goggles supplied during usage. See chapter protective goggles for more information. The protective goggles
corresponds to the requirements of EN 171:2002 and serves to protect the eyes.
CAUTION: Never look directly into the infrared light without protective goggles.
The recommended duration of treatment is maximum 12 minutes.
We recommend selecting a shorter radiation period to start with. However, the skin of some people may show an over-
sensitive (e.g. with extreme redness, blistering, itching, heavy sweating) or allergic reaction appear. Examine the radiated
section of the body regularly. Discontinue radiation immediately if any signs of an over-sensitive or allergic reaction appear
and consult a physician.
Appliance description
1
5
2
Instructions for use
Initial use
17 • EN
3
4