Heitronic 500710 Instructions D'installation Et D'utilisation page 3

GB Installation and Operating Instructions
LED Floodlight
Art. No. 500710
These operating instructions are only intended for the products listed above.
They contain important notes concerning operating the product for the first time and handling
the LED floodlight.
Therefore pay attention to these operating instructions, even if you pass this product on to third
parties.
It is important, therefore, that these instructions are archived carefully for referring to information at a
later stage.
1. Introduction
Dear customer, thank you for deciding to purchase our product.
You have acquired a product from Vollmer, which has been built according to the current state of technology.
The LED floodlight fulfils the requirements of effective European and national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
instructions of this operation manual!
2. Safety Instructions
•
The guarantee becomes invalid if damage occurs due to the failure of following these operating
instructions!
•
We do not accept liability for any consequential damage!
•
Commissioning is strictly prohibited if there are any damages to the LED floodlight.
•
Do not allow the LED floodlight to come into contact with extreme heat or naked flames.
•
The product in its entirety must not be altered or modified. Alterations to the LED floodlight invalidate the
guarantee.
•
The type plate must not be removed.
3. Proper Use
The LED floodlight is designed for use in indoor/outdoor areas.
This product is only intended for lighting purposes and may:
•
only be operated with a voltage of 230V ~50Hz
•
only be connected according to protection class I (one)
•
only be operated when mounted to a sturdy, level and non-tilting surface
•
only be operated on normal or non-flammable surfaces
•
not be subjected to strong mechanical loads or heavy soiling.
4. Before Installation/Commissioning
•
The LED floodlight must only be used outside its packaging.
•
Take the LED floodlight carefully out of the packaging.
•
Make sure that the LED floodlight has not been damaged during transport before taking it into operation.
The light may not be operated if there are any damages to electrical parts. Repairs may only be carried
out by a qualified electrician.
•
Keep packaging materials away from children and pets. Asphyxiation hazard!
Installation instructions article no: 500710 Page 1 of 2
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach Stein
From 20.12.2019