Function Description; Overview; Charging The Battery; Removing/Inserting The Battery - Deltafox DG-CHT 1845 T Set Traduction De La Notice D'utilisation Originale

Function Description

The telescopic handled hedge trimmer is
driven by an electronic motor. The equip-
ment is double-insulated for safety and
does not require earthing.
The unit is equipped with a double-sided
safety cutter bar. When cutting, the
blades move backwards and forwards in
linear motion.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and briars.
Please note the following descriptions for
the function of the operating components.

Overview

Device
1 Safety blade
2 Cutting head
3 Vents
4 Lock button for cutting head that
can be angled
5 Screw sleeve telescopic arm
6 Telescopic arm
7 Quick release fastener
(for telescopic arm)
8 Soft grip
9 Carrying eyelet for shoulder strap
10 Rechargeable battery
11 Safety switch
12 On/off switch
13 Grip
Accessories
10 Rechargeable battery
10a Release key battery
10b State of charge display battery
(LED)
10c Key for state of charge display
14 Blade protection
15 Shoulder strap
16 Battery charger

Charging the battery

Do not expose the battery to
extreme conditions such as heat
or impact. Risk of injury from
escaping electrolytic solution!
After eye/skin contact, rinse the
affected areas with water or a
neutraliser and consult a doctor.
Charge the battery in a dry
room only. Prior to attaching
the charger, check that the bat-
tery's outer surface is clean
and dry. There is a risk of injury
due to electric shock.
• Charge the battery before the first
time of use. Do not briefly charge the
battery several time in a row.
• If a fully recharged battery lasts for con-
siderably shorter operating times, the
battery is used up and needs to be re-
placed. Only use an OEM spare battery
available from our Customer Service.
• Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information.
• The warranty excludes all defects
caused by improper handling.
Removing/inserting the
battery
1. To insert the battery (10), place
it on the guide track and push it
into the appliance. It will audibly
snap in.
2. To remove the battery (10) from
the appliance, press the release
button (10a) on the battery and
pull out the battery.
GB
55