Intended Use; Function Description; Overview - Deltafox DG-EHT 6860 3D Notice D'utilisation Originale

l) Regularly check the blades for wear
and have them resharpened. Blunt
blades overload the machine. Damage
caused as a result is not covered by
the guarantee.
m) Always switch off the equipment first
and disconnect from the mains
- If leaving the equipment unattended
- Before removing blockages
- Before inspection, maintenance or
cleaning work
- If you have come into contact with a
foreign body
- Whenever the machines starts to
vibrate unusually
n) Always ensure that the ventilation
holes are free of dirt.

Intended Use

The equipment is specified for use only
for the cutting and trimming of hedges,
bushes and ornamental shrubs in the
domestic environment. Any other use that
is not explicitly approved in these instruc-
tions may result in damage to the equip-
ment and represent a serious danger to
the user.
The equipment is intended for use in the
field of DIY. It is not designed for commer-
cial use.
The equipment is designed for use by
adults. Adolescents over the age of 16
may use the device only under supervi-
sion. Do not use the hedge trimmer in the
rain or on wet hedges.
The operator or user is responsible for ac-
cidents or damage to other people or their
property.
The manufacturer is not liable for dam-
ages caused by unspecified use or incor-
rect operation.
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt,
in order to avoid overstressing of
the machine. Damages caused by
cutting with blunt blades are not
covered by the guarantee.

Function Description

The electric hedge trimmer is driven by
an electronic motor. The equipment is
double-insulated for safety and does not
require earthing.
The hedge trimmer is equipped with a
double-sided safety cutter bar. When
cutting, the blades move backwards and
forwards in linear motion. The impact pro-
tection on the tip of the cutter bar prevents
unpleasant recoils should the trimmer
come into contact with walls, fences and
so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and
briars.
Please note the following descriptions for
the function of the operating components.
The illustration how to handle the
appliance can be found on page 2.

Overview

1 Impact protection
2 Safety blade
3 Hand protection
4 Loop grip with deadman switch
5 Vents
6 Locking button for articulated
handle
7 Locking button for handgrip
8 ON / OFF switch
GB
57