Getting Started-Android - j5 create Wormhole Switch Manuel De L'utilisateur

WORMHOLE SWITCH

GETTING STARTED-Android

Follow the steps below to configure the j5 Wormhole Switch connection
and start the application in Android:
1. Make sure your Android platform supports a cursor function.
2. Make sure network is available
3. Connect the end of the Wormhole Switch to a USB port on the
Android tablet
4. Search APK FILE<WormholeSwitch.apk> in the wormhole Switch
device. It is located in "File Manager"> " USB Storage(usb0-disk0)",
and click "install.htm" > "HTMLViewer" > "Wormhole Switch" to
download.
Note: You can also install APK by:
1. Download at "Support" of j5create website directly to Tablet.
2. Save the APK file on the Micro SD card from PC and install it
on the Android tablet.
5. After download is complete, Install "WormholeSwitch.APK"
the icon
6. Run the (
application. You will see the initial launched picture ,
Android : Wormhole is connected
Windows : Wormhole is not connected
WormholeSwitch will be shown in tablet desktop.
)WormholeSwitch on Tablet to start the wormhole
12
USER MANUAL