Getting Started-Windows - j5 create Wormhole Switch Manuel De L'utilisateur

WORMHOLE SWITCH

GETTING STARTED-Windows

Follow the steps below to configure the j5 Wormhole Switch connection
and start the application:
1. Connect one end of the Wormhole Switch to a standard USB
port on one of the two computers. Connect the other end of the
Wormhole Switch to a USB port on the second computer. (Please
see the pictures below)
2. The device will automatically start the Wormhole Switch software
installation on both computers.
3. An "AutoPlay" option window may appear. Please click on the
option "Run WKMLoader.exe"
Troubleshooting:
If auto-run is not launched, please follow the steps below to start
the j5 Wormhole Switch application:
1. Insure both computers are properly connected to the USB cable.
2. Go to My Computer and double-click the j5 Wormhole
Switch icon ( ) to start the application. See the picture below.
10
USER MANUAL