Media Browser Menu; Timeshift Recording; Instant Recording; Watching Recorded Programmes - CONTINENTAL EDISON CELEDBMS40200C3 Mode D'emploi

It is recommended to use USB hard disk drives for
recording HD programmes.
Do not plug out the USB/HDD during a recording. This
may harm the connected USB/HDD.
Multipartition support is available. The maximum of two
different partitions are supported. The first partition of the
USB disk is used for PVR ready features. It also must
be formatted as the primary partition to be used for the
PVR ready features.
Some stream packets may not be recorded because
of signal problems, so sometimes video may freezes
during playback.
Record, Play, Pause, Display (for PlayListDialog) keys
can not be used when teletext is ON. If a recording starts
from timer when teletext is ON, teletext is automatically
turned off. Also teletext usage is disabled when there is
an ongoing recording or playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast to
activate timeshifting mode.In timeshifting mode, the
programme is paused and simultaneously recorded to
the connected USB disk. Press
to resume the paused programme from where you
stopped. Press the STOP button to stop timeshift
recording and return to the live broadcast.
Note: Timeshift cannot be used while in radio mode.
Note : You cannot use the timeshift fast reverse feature
before advancing the playback with the fast forward
option.

Instant Recording

Press (RECORD) button to start recording an event
instantly while watching a programme. You can press
(RECORD) button on the remote control again to
record the next event on the EPG. In this case, an OSD
will be displayed, indicating the programmed events for
recording. Press (STOP) button to cancel instant
recording.
Note: You can not switch broadcasts or view the Media Browser
during the recording mode. While recording a programme or during
the timeshifting, a warning message appears on the screen if your
USB device speed is not sufficent.

Media Browser Menu

You can play photo, music, and movie files stored on a USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of the TV. Pressing the MENU button while in the Media Browser
mode will access the Picture, Sound and Settings menu options. Pressing the MENU button again will exit from
this screen. You can set your Media Browser preferences by using the Settings Menu.
St art playba ck w ith
Start playback with OK and activate
Start playback with OK/
(PLAY) button again
Loop/Shuffle Mode Operation
a n d a ct iva te
and activate
English - 36 -

Watching Recorded Programmes

Select the Recordings Library from the Media
Browser menu. Select a recorded item from the list (if
previously recorded). Press the OK button to view the
Play Options. Select an option then press OK button.
Note: Viewing main menu and menu items will not be available
during the playback.
Press the (STOP) button to stop a playback and return
to the Recordings Library.
Slow Forward
If you press (PAUSE) button while watching recorded
programmes, the slow forward feature will be available.
You can use
button consecutively will change slow forwarding speed.
Recording Configuration
Select the Recording Configuration item in the
Settings menu to configure the recording settings.
Format Disk: You can use Format Disk feature for
formatting the connected USB disk. Your pin is required
to use the Format Disk feature (default pin is 0000).
IMPORTANT: Note that ALL the data stored on the
USB disk will be lost and the disk format will be
converted to FAT32 if you activate this feature. If
your USB disk malfunctions, you can try formatting
the USB disk. In most cases formatting the USB disk
will restore normal operation; however, ALL the data
stored on the USB disk will be lost in such a case.
Note: If "USB is too slow" message is displayed on the
screen while starting a recording, try restarting the recording.
If you still get the same error, it is possible that your USB
disk does not meet the speed requirements. Try connecting
another USB disk.

Quick Menu

Quick Settings menu allows you to access some options
quickly. This menu includes Power Save Mode, Picture Mode,
Equalizer Settings, Favourites and Sleep Timer options.
Press Q.MENU button on the remote control to view quick
menu. See the following chapters for the details of the listed
features.
T V p l a y s n e x t f i l e a n d l o o p t h e l i s t .
t h e s a m e f i l e w i l l b e p l a y e d i n a l o o p ( r e p e a t ) .
t h e f i l e w i l l b e p l a y e d i n a s h u f f l e .
button to slow forward. Pressing