Duramaxx 10029780 Mode D'emploi page 20

EN
3. Fit and use parking brake
Fit the parking brake with the hexagonal key.
4. Mounting the wheels
Place the wheel hub on the axle by simply pressing it into the wheel until it
locks into place. To remove the wheels again, lift the rear side of the trailer and
press buttons on the axle.
5. Mounting the arm of the trailer hitch
Lift the trailer at the front. Remove the retaining pin for the bracket from the
rear hole. Hold the arm flush with the frame and put the locking pin back in and
close the spring clamp.
20