Duramaxx 10029780 Mode D'emploi page 19

EN
ASSEMBLY
1. Composition of the frame
Remove the parts of the trailer from the packaging. While the trailer is still
folded, lift both side parts into an upright position. The locking pin must be
secured with the spring clip.
OPEN
CLOSED
2. Fit the crossbar and the seat
Mount the crossbar with the fabric seat (on the side panels at the top) by
inserting one end into the crossbar holder at the top of the side panel. Screw in
the fastening screw.
Make sure that the luggage strap is tightened at the back.
19