Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
THE DIFFERENT LIGHTING MODES
•
Press the ON/OFF button once, the garland light will be on.
•
When you press the MODE button, the garland light will switch from one lighting mode to the other.
MODE 1: Continuous
MODE 2: Combination
MODE 3: In waves
MODE 4: Alternate sequential
•
When you press the ON/OFF button again, the garland light will switch off.
CARE AND STORAGE
CLEANING
•
Clean the solar panel from dust and debris on a regular basis using a damp cloth. Do not use che-
micals or aggressive substances to clean the unit. A dirty solar cell does not charge the batteries
correctly. It will cause premature ageing of batteries and device malfunction.
•
While cleaning, be sure not to scratch the solar panel.
•
In winter, clean snow or other deposits from the solar panel to allow charge.
STORAGE
•
Turn the garland light off (by pressing the ON/OFF button).
•
Store it in a way that the solar sensor can capture a little light on a daily basis and transmit it to the
battery. The battery needs energy to maintain a certain load during the storage period.
•
When storing the lamp for a longer period (e.g. during winter) over four months, please charge the
batteries regularly. Place the garland light panel in the sun during several days (3-4 days). The
batteries will charge even if the lamp stays on OFF.
RECYCLING AN ELECTRICAL APPLIANCE
Your electrical device may contain components that are dangerous for the environment and should not
be disposed in nature or mixed with your household waste. To avoid any risk to the planet, here's how to
dispose your device:
•
Do not attempt to disassemble or access the components inside the device.
•
Do not burn the device.
•
Dispose the device and components in an authorized recycling centre.
26
MODE 5: Variable fade
MODE 6: Flicker
MODE 7: Continuous fade
MODE 8: Flash
1/10/2019
Publicité
Table des Matières
