Battipav MIXIT Mode D'emploi page 14

GB
• Do not use appliances with switches that cannot be switched on and off.
Caution!
• For your own safety, use only the accessories listed in the instructions for use or recommended in dedicated catalogues. The use of
accessories or consumable tools that are different and, in any case, not recommended in the instructions for use or catalog, may result
in a risk of injury to you.
Have tools repaired only by qualified personnel.
• This electric tool complies with the applicable safety regulations. Damaged safety devices or other parts should be properly
repaired or replaced by an authorised Service Centre unless otherwise indicated elsewhere in this instruction manual.
MACHINE DESCRIPTION
The MIXIT is a mixing machine expressely designed for mixing tile adhesives, paints, varnish and epoxy resins. It leverages the mixing action
of a whisk tool capable of mixing compounds with high hygroscopicity up to volumes of 50 l. The operator positions himself in front of the
containment tank within reach of the controls. He activates tool operation, pours water then the product to be mixed directly into the whisk
guard, which distributes it evenly in the bucket, until mixing is complete.
RECOMMENDED USE
TOOL: BATTIPAV MIXING AGITATOR ART. SP 05502
RECOMMENDED USE:tile adhesives, paints, varnish and epoxy resins.
Admissible working conditions: CONTINUOUS DUTY
SYMBOLS AND SIGNS:
Danger/prohibition stickers are applied to the machine where necessary.
12
A1 Intructions
B1 Presence of electric current
B2 Obligation to use the prescribed PPE (Protective goggles and ear muffs)
B3 Look at these prior to using the machine.
B4 Obligation to use the prescribed PPE (Protective gloves)
MANUFACTURER AND MACHINE
The nameplate shown is fitted directly on the machine. It indicates all the references and information necessary for safe operation.
11
A Machine model
B Item
C Serial number
D Mains voltage.
E Power supply frequency
F Current absorption
G Installed power rating
H Tool rotation speed
I Class of protection
L Starter capacitor
INSTALLATION
TRANSPORT
The machine is easily transportable using the two side handles.
1
HANDLING
Using the wheeled
ALWAYS REMOVE THE MIXING HEAD BEFORE MOVING THE BUCKET.
2
Hook the wheeled trolley to the bucket handles.
3
Lift it for handling.
POSITIONING
Place the machine on a stabile surface. To place MIXIT in working position, proceed as follows:
14
trolley it is possible
M IP Level
N Year of manufacture
O Max tool diameter
P Internal tool diameter
Q Accessories
R Accessories
S Manufacturer's name
T Manufacturer's name and address
U Trademarks / Certifications
to transport the mixed product through
Battipav srl
the site.