Starlyf Pressure Cooker Manuel D'utilisation page 7

than four hours may alter the flavour and
appearance of food.
- The Keep Warm function can be activated
manually or automatically once cooking is
complete.
- The Keep Warm function does not switch
off automatically.
If you want Starlyf® Pressure Cooker to
operate in Keep Warm mode:
o Prepare the food you wish to cook, place
it in the pot and then return the pot to the
cooker.
o Close the lid (2) and turn it anticlockwise.
o Check that the pressure regulator valve (3)
is in the Airtight position (maintain pressure).
o Connect the device to the mains.
o The LED display will show "00:00".
o Press the Warm/Cancel button.
o The corresponding indicator will light up
and the letters "bb" will appear on the display.
o We recommend that you turn the pressure
regulator valve to the Exhaust position
(release pressure), since the intention is only
to keep the food warm.
o Starlyf® Pressure Cooker will then keep
the food warm.
o To cancel, press the Warm/Cancel button.
The corresponding pilot light will switch off.
RELEASE PRESSURE
- Before opening the lid, release the pressure
naturally.
- If you are using the natural release method,
do not turn the pressure regulator valve after
cooking.
- Around 10-20 minutes after cooking has
finished, you can turn the pressure regulator
valve to the right or left.
- If no steam is released from the pressure
regulator valve when it is turned, this means
that there is no pressure left inside the
cooker.
- To use the quick release method, turn
the pressure regulator valve to the Exhaust
position.
- Important: Use a glove or utensil when
releasing the pressure. Keep your hands and
face away from the pressure outlet when the
regulator valve is in the Exhaust position.
CLEANING
- When a programme is finished, switch off
the device and leave it to cool down before
cleaning it.
-
We recommend
Pressure Cooker regularly to remove all
traces of food.
- Switch off the device and leave it to cool
down before you start any cleaning.
- Always make sure that the device is
depressurized and completely cold before
cleaning it.
- Remove the water collector (12), clean it
and dry it.
- Clean the lid, rubber seal, pressure
regulator and filter with a damp cloth before
drying them.
- All components except for the electrical
part and power cord can be cleaned with
cleaning Starlyf®
soap and water or in the dishwasher. Always
rinse them to remove traces of soap.
Cleaning the outer part of the lid and
body:
- Clean with a damp cloth and soap.
- Use a soft, dry cloth to clean the control
panel.
- Make sure that there are no traces of food
in the steam outlet.
Cleaning the inner part of the Starlyf®
Pressure Cooker:
- Remove the pot (6) from the device. Wipe
it with a damp cloth and a few drops of soap
before drying it.
- Do not use solvents, products with an acid
pH, bleach or abrasive products to clean
your Starlyf® Pressure Cooker.
- To clean the heating element (15):
o Remove the pot (6).
o Clean the heating element (15) with a
damp cloth.
- To clean the rubber seal (9):
o Soak in hot water and clean with a sponge.
Cleaning the accessories:
- Spoon and measuring cup: place in hot
water and wash with a sponge.
IMPORTANT: never pour water directly into or
onto your Starlyf® Pressure Cooker or place
it under a running tap. Do not use scouring
powder or other abrasive products.
- The following parts can be washed with
hot soapy water or in the dishwasher (gentle
cycle):
o Pot
o Measuring cup
o Spoon
- Ensure that your Starlyf® Pressure Cooker
is completely cold before storing it away.
Disposal of materials
A symbol of a crossed-out wheeled
bin means you should find out about
and follow local regulations about
disposing of this kind of product. Do
not dispose of this product as you
would other household waste.
Dispose of this device in accordance with the
corresponding local regulations.
Electrical and electronic devices contain
hazardous substances that can have harmful
effects on the environment and/or human
health and should be recycled properly.
Warranty: This product is covered by a
warranty against manufacturing defects
subject to the time periods stipulated by
the legislation in force in each country.
This warranty does not cover damages
resulting from inadequate use, negligent
commercial use, abnormal wear and tear,
accidents or improper handling.
Australia & New Zealand only
This product has the benefit of certain
Consumer Guarantees. These are prescribed
by the Australian Consumer Law & the
7