Starlyf Pressure Cooker Manuel D'utilisation page 5

decreased sufficiently.
- Regarding the instructions for
cleaning surfaces in contact with
food or oil, thanks to refer to the
below paragraph "cleaning" in
manual.
- There is a potential injury from
misuse.
- The heating element surface is
subject to residual heat after use.
Avoid spillage on the connector.
IMPORTANT INSTRUCTIONS
STORE THESE
INSTRUCTIONS FOR FUTURE
REFERENCE
The set contains:
- 1 Starlyf® Pressure Cooker
- 1 removable pot
- 1 measuring cup
- 1 instruction manual
- 1 spoon
3. COMPONENTS
1. Lid handle
2. Upper lid
3. Pressure regulator valve
4. Floating valve (external view)
5. Floating valve (internal view)
6. Pot
7. Inner lid
8. Side handle
9. Decorative trim
10. Control panel
11. Power cord
12. Water collector
13. Cooker body
14. Heating element
15. Stand
16. Filter
17. Rubber seal
18. Measuring cup
19. Spoon
Control panel
A. Pressure release indicator
B. Keep pressure indicator
C. Keep warm indicator
D. Timer indicator (Preset)
E. Fish/Vegetables button
F. Rice button
G. Meat/Chicken button
H. Congee button
I. Soup button
J. Tendons/Beans button
K. Cake button
L. Baby cereals button
M. Rare cooking indicator
N. Medium cooking indicator
O. Well cooking indicator
P. Cooking standard button
Q. Timer button (Preset)
R. Warm/Cancel button
Instructions for use
Before first use
- Ensure that you have removed all packaging
from the product.
- Remove all accessories.
- Before using the product for the first time,
clean the parts that are in contact with food,
as described in the Cleaning section.
- To remove any smells left over from the
manufacturing process, half-fill the pot with
water, close the lid and heat it. Ten minutes
after releasing the pressure using the
pressure valve, open the lid and pour the
water out.
Opening the lid
Hold the lid handle firmly, turn it clockwise
until it loosens (Fig. 1), then gently pull
upwards (Fig. 2).
OPEN
- Remove the pot (6) and add the ingredients.
Important: The level of water and ingredients
must never exceed 4/5 of the capacity of the
pot (Fig. 3).
- If you are cooking foods that increase in
volume when cooked, do not fill the pot more
than 3/5 full or less than 1/5 full (Fig. 4-5).
Closing the lid
- Before closing the lid, check that the rubber
seal (17) is in the correct position.
Important: If the rubber seal is damaged, do
not use the pressure cooker and contact the
customer service department.
- Hold the lid by the handle and turn it
anticlockwise until it is in the closed position
(Fig. 6).
Note: To check that the lid is properly closed
(2), ensure that the pressure regulator valve
(3) is on your left (when you are facing the
control panel, 10).
Move the pressure regulator valve (3) to the
Airtight position and ensure that the floating
valve has lowered.
When moving the pressure regulator valve
(3) to the Airtight position (maintain pressure)
or Exhaust position (release pressure), the
marks on the pressure regulator valve (3)
should be lined up with the arrow on the
handle (Fig. 7-8).
- Select the required cooking function and
the corresponding light will turn on to indicate
that the chosen function is running.
- The display will flash for a few seconds
to indicate that there is still time to change
the programme (by pressing the required
programme) or change the duration of
the programme (by pressing the Cooking
standard button).
- The display will then stop flashing and
the machine will beep to indicate that the
programme has started.
- You can press Warm/Cancel to interrupt the
programme at any time.
- While Starlyf® Pressure Cooker heats up
5