Regulatory Statements
CE Compliance
Working Environment
This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements to be observed for so-called "Residential, commercial and
light industry environments". TOSHIBA do not approve the use of this
product in working environments other than the above mentioned
"Residential, commercial and light industry environments".
For example, the following environments are not approved:
Industrial Environments (e.g. environments where a mains voltage of
■
380 V three-phase is used)
Medical Environments
■
Automotive Environments
■
Aircraft Environments
■
Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA.
The consequences of the use of this product in non-approved working
environments may be:
Interference with other devices or machines in the near surrounding
■
area.
Malfunction of, or data loss from, this product caused by disturbances
■
generated by other devices or machines in the near surrounding area.
Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non-approved
working environments before use. In the case of automobiles or aircraft,
the manufacturer or airline respectively should be asked for permission
before use of this product.
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.
User's Manual
This product is CE marked in accordance with the
requirements of the applicable EU Directives. Responsible
for CE marking is TOSHIBA EUROPE GMBH,
Hammfelddamm 8, 41460 Neuss, Germany. A copy of the
official Declaration of Conformity can be obtained from
following website: http://epps.toshiba-teg.com.
Toshiba Thunderbolt™ 3 Dock
EN-7