MasterCraft 068-0018-0 Guide D'utilisation page 7

6
STEP 6
Attach the bottom panel (1) to the left
side panel (4), right side panel (3),
front frame (2) and bottom back panel
(6). Line up the screw holes and use
the screwdriver (24) with seven
M4x10 screws A (20) to secure.
Note:
Only the innner holes of the left side
panel, right side panel, front frame and bottom
back panel are used for attaching the bottom
panel. The other four side holes at the corners
are reserved for bumpers.
STEP 7
Attach swivel wheels with brake and
swivel wheels w/o brake (14 and 15)
to the bottom panel (1) and surround-
ing frame. Make sure the swivel
wheels with brake are installed at the
front side. Use the screwdriver (24)
with sixteen M8x18 screws D (22) to
secure them.
STEP 8
Attach bumpers (16) to the bottom
four corners of the cabinet. Use the
screwdriver (24) with sixteen M4x18
screws C (23) to secure them.